Replacing The Ni-Cd Batteries - YOKOGAWA MT210 User Manual

Digital manometer
Table of Contents

Advertisement

Replacing the Ni-Cd Batteries

IM 767361-01E
The life of the Ni-Cd batteries is reduced if they are used repeatedly, even if they
are charged completely. The battery replacement interval differs depending
on operating conditions, but you should replace them approximately every two
years.
Battery replacement must be performed as described on the next page.
• Before replacing the batteries, be sure to turn OFF the POWER switch
(front panel) then the MAIN POWER switch (rear panel), and remove
the power cord from the AC outlet, since there is the possibility of an
accident or short-circuit in the charging circuit.
• Use only Ni-Cd batteries manufactured by YOKOGAWA (Model 269914).
French
• Avant de remplacer le fusible, assurez-vous de mettre hors tension les
interrupteurs POWER et MAIN POWER, de retirer les branchements de
chaque borne d'entrée et de sortie, et de retirer le cordon d'alimentation
de la prise secteur.
• Utilisez uniquement des batteries Ni-Cd fabriquées par YOKOGAWA
(Modèle 269914).
WARNING
AVERTISSEMENT
Battery Pack (Optional)
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt210fMt220

Table of Contents