Table of Contents
Advertisement
Storing and Recalling Data (MT220 Only)
Storing Data
Auto Store
IM 767361-01E
Acquired data is assigned a specific memory number and then stored in the
internal memory.
1 to 9999 can be set as the data number (memory number). If no destination
memory number is specified, data will be stored under consecutive memory
numbers (default starting number is 1). When a memory number is specified,
data is saved successively starting with that number.
Two types of storage methods are available, auto store and manual store.
Data acquisition interval
(number of samples taken per stored data item):
No. of storage times:
Destination memory No.:
No. of data which can be stored:
Data is stored automatically the specified number of times and at the specified
interval. If no destination memory number is specified, storage starts from the
memory number after the one in which last data item was stored.
Making Auto Store Settings
1.
Press MENU.
2.
Keep pressing
or
ENTER/LOCAL to proceed to the store mode setting screen.
3.
Press
or
to display
4.
In the store rate setting screen (
acquisition interval, then press ENTER/LOCAL.
5.
In the screen to set the number of data (
number of data to be stored, then press ENTER/LOCAL.
6.
To return to the normal measurement screen, press MENU.
Setting the Memory Number at Which Storage Is to Be Started
7.
Press No. to display the memory number setting screen (
8.
Use ,
and
to set the desired memory number, then press ENTER/LOCAL.
Storing Data
9.
Pressing STORE automatically stores data items one by one. The current memory
number to which data is being stored is displayed for approximately 0.5 seconds
in the upper part of the screen.
Data automatically ceases to be stored when the stored number of data reaches
the specified maximum number. Then
of the screen and
seconds.
Stopping Auto Store
10.
Press STORE again. Auto store stops.
of the screen and
seconds.
Note
The store mode, store rate, and allowed number of stores cannot be changed during auto store.
1, 4, 16, 64, 512
1 to 2000
1 to 9999
2000
until
is displayed in the screen, then press
, then press ENTER/LOCAL to select the mode.
), use
and
), use
is displayed in the upper part
in the lower part of the screen for approximately 0.5
is displayed in the upper part
in the lower part of the screen for approximately 0.5
to select the desired
,
and
to set the
).
43
Advertisement
Table of Contents
