Setting Measurement Conditions In Simple Mode - YOKOGAWA AQ7280 User Manual

2.1 Setting the Measurement and Analysis Conditions

Setting Measurement Conditions in Simple Mode

Press the Meas Setup soft key to display the following screen.
Wavelength
• 850 nm, 1300 nm, 1310 nm, 1383 nm, 1490 nm, 1550 nm, 1625 nm, 1650 nm
Depending on the OTDR unit, you can set the following wavelengths.
Model
AQ7282A
AQ7283A
AQ7284A
AQ7285A
AQ7283E
AQ7283F
AQ7282G
• Multi Wavelength Measurement
In a single measurement, multiple supported wavelengths are measured one at a time.
If multi wavelength measurement is selected, the wavelength of optical pulse being measured is
displayed on the screen.
Auto Save
After an optical pulse measurement is complete, the measurement waveform is automatically
saved. The AQ7280 creates a folder using the current date for its name in the root folder of the drive
and saves the file.
Drive
Folders are automatically created. File names are automatically assigned. For details on file names,
see section 6.3.
2-2
Optical Pulse Wavelength
1310 nm, 1550 nm
1310 nm, 1550 nm, 1625 nm
1310 nm, 1550 nm, 1650 nm
1310 nm, 1490 nm, 1650 nm
Set the wavelength (850nm, 1300nm,
1310nm, 1383nm, 1490nm, 1550nm,
1625nm, 1650nm,
multi wavelength measurement).
The available options vary depending on
the OTDR unit.
Set auto save (OFF, ON).
Select a drive (Int. Memory, SD card,
USB memory 1, USB memory 2).
Selectable when auto save is ON.
Model Optical Pulse Wavelength
AQ7283H
1310 nm, 1550 nm, 1625 nm
AQ7284H
AQ7283J 1310 nm, 1383 nm, 1550 nm,
1625 nm
AQ7283K 1310 nm, 1490 nm, 1550 nm,
1625 nm
AQ7282M 850 nm, 1300 nm
Wavelength of the optical
pulse being measured
IM AQ7280-01EN