Ink Eject - Epson SC-B7000 Series Service Manual

SC-F7000 Serie/SC-B7000 Series

4.12.3 Ink eject

Due to the structure of this printer, you cannot replace only one
C H E C K
P O I N T
tank. Therefore, replacement of the tanks should be made
according to the combinations below.
For SC-F7000 Series
BK and M
•
Y and C
•
For SC-B7000 Series
• BK and Y
M and C
•
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Remove either of the ink tanks, cleaning cartridges or ink cartridges of the colors
to exchange.
3. Lower the lock levers.
4. Start the Service Program and select
5. Select the nozzle rows to eject (All channels
[Run] button.
Running the Ink eject function one time is not enough to prevent
C A U T I O N
ink from leaking when removing the ink tubes. Prepare paper or
cloth to wipe off leaked ink in advance or run the Ink eject function
twice in a row.
6. When finished, click [Finish].
7. Turn off the printer.
ADJUSTMENT
Ink eject.
or Single channel), and click the
Ink Supply Related Checks and Adjustments
Figure 4-15. [Ink eject] Screen
Revision A
116
Confidential