Epson SC-B7000 Series Service Manual page 65

SC-F7000 Serie/SC-B7000 Series
12. Install the four ink cartridges for service.
13. Lower all the lock levers.
14. Start the printer in the Serviceman Mode.
Turn on the printer while pressing [Menu] + [Back] + [OK].
15. Select Tube inner pressure reduction.
Press the [Run] button to reduce the pressure in the tube.
Figure 3-18. [Tube inner pressure reduction] screen
DISASSEMBLY & ASSEMBLY
REPLACEMENT
1. Select
Press the
The CR lock is released and the CR Unit moves to the full side, then the printer
turns off automatically.
(p109)
2. Remove the Left Rear Cover.
3. Remove the Left Upper Cover.
4. Remove the CR Cover.
C A U T I O N
Disassembly and Assembly Procedure
Auto CR unlock & move CR to full column
[Run] button.
(p56)
Figure 3-19. [Auto CR unlock & move CR to full column side] screen
(p58)
(p58)
(p60)
Be sure to move the CR Unit to the left end before performing the
following step. Performing the following step with the CR Unit
located on the platen or the Pump Cap Unit may damage the Print
Head.
Revision A
side.
65
Confidential