SC-F7000 Serie/SC-B7000 Series
3.4.5.20 Ink Tank/Cartridge
This section describes the removing procedure for the ink tank and the installation
procedure for cartridges. There are two types of cartridges; cleaning cartridges and ink
cartridges for service.
When using the ink tanks, cleaning cartridges, and ink cartridges
C A U T I O N
for service, they should be validated by using software (Service
Program). (See
P. 114
REMOVING THE INK TANKS
1.
Remove the four screws (one each) that secure the ink tank.
Figure 3-35. Screws that secure the ink tank
2.
Remove the two screws and remove the ink tank guard.
DISASSEMBLY & ASSEMBLY
or
P.
115.)
Disassembly and Assembly Procedure
Ink tank guard
Figure 3-36. Ink tank guard
3.
Lift the lock levers.
4.
Remove the ink tanks.
INSTALLING THE CARTRIDGES
1.
Loosen the four screws inside the ink holder.
Just loosen the screws, but do not remove them.
C A U T I O N
Revision A
79
Confidential