Epson SC-B7000 Series Service Manual page 62

SC-F7000 Serie/SC-B7000 Series
Ink Path Holder Assy Ink Path Joint
C
C
B
Clamp
Figure 3-12. Removing the Damper Kit
DISASSEMBLY & ASSEMBLY
Joint Rubbers
B
A
A
A
Damper Kit
CR Unit
Disassembly and Assembly Procedure
AFTER REPLACEMENT
1. Install the four ink cartridges for service.
2. Turn the printer on.
3. Select Cleaning.
Select CL3 and all channels and press the
4. Select Nozzle Check.
Select Nozzle Check Pattern Print, and press the
nozzle check. (p109)
5. Select Switch between Ink cartridges and Ink
Select All channels and Ink Cartridge for
validate the ink tanks. (p114)
6. Turn off the printer.
7. Turn on the printer.
8. Confirm that there are no errors.
Revision A
(p79)
[Run] button to perform CL3.
[Run] button to perform the
tanks.
service, and press the [Run] button to
Confidential
62