Epson SC-B7000 Series Service Manual page 77

SC-F7000 Serie/SC-B7000 Series
AFTER REPLACEMENT
Install the four ink cartridges for service.
1.
2. Turn on the printer.
3. Discard the waste ink.
4. Reset the counter for the waste ink bottle from the control panel.
Maintenance Waste Ink Counter
5. Select Initial ink charge.
Select All channels, and press the
(p118)
6. Select Nozzle Check.
Select Nozzle Check Pattern Print, and press the
nozzle check. (p109)
7. Perform cleaning if necessary. (p109)
8. Select Switch between Ink cartridges and Ink
Select All channels and Ink Tank, and press the
tanks. (p114)
9. Turn off the printer.
Remove the four ink cartridges for service.
10.
11. Install the ink tanks. (p79)
12. Turn on the printer.
13. Confirm that there are no errors.
DISASSEMBLY & ASSEMBLY
(p79)
[OK]
[Run] button to perform the initial ink charge.
[Run] button to perform the
tanks.
[Run] button to validate the ink
(p79)
Disassembly and Assembly Procedure
Revision A
77
Confidential