Epson SC-B7000 Series Service Manual page 25

SC-F7000 Serie/SC-B7000 Series
Menu
Print Nozzle Patter
Periodical Cleaning
Printer Setup
Cleaning Cycle
Sleep Mode
Restore Settings
PRODUCT DESCRIPTION
Menu Item/Setting Values (shaded one is the default)
Off
1 - 10 pages
Off
Light
1 - 240 hours
Off
Medium
1 - 240 hours
Off
Heavy
1 - 240 hours
Off
Power
1 - 240 hours
Off
1 - 10 pages
15 - 240 min
Yes
No
Table 1-15. Setup Menu
Selects the execution timing for the periodical check pattern printing from
[Off] or one of the values between per [1] page to per [10] pages. When this is
set to [Off], the periodical check pattern printing is not executed. When one of
the values between per [1] page to per [10] pages is selected, the check pattern
is printed on the top of the set page. Allows you to judge whether any
clogging can be seen in the following printing by checking the check patterns
later on.
Selects the execution timing for periodical head cleaning from [Off] or once
per [1] hour to per [24] hours. When this is set to [Off], Periodical Cleaning is
not executed. When one of the values between per [1] hour to per [24] hours is
selected, head cleaning is performed automatically when the set time has
passed. If the set time has come when the printer is printing or in the sleep
mode, Periodical Cleaning is performed after finishing the job or mode. In
addition, the time counter is cleared in the timings listed below.
When this printer is turned On.
When the set value of this setting is changed.
When All Nozzles Cleaning is performed manually.
Selects the execution timing for the periodical head cleaning from [Off] or
one of the values between per [1] page to per [10] pages. When this is set to
[Off], Periodical Cleaning is not executed. When one of the values between
per [1] page to per [10] pages is selected, head cleaning is performed
automatically before printing the set page.
Turns to the sleep mode automatically when no error is occurring, no print job
receiving or there are no operations on the control panel. In this setting, sets
the time to turn to the sleep mode automatically.
When this is set to [Yes], returns the set values in [Printer Setup] menus to
their factory default.
Control Panel
Revision A
Explanation
Confidential
25