Introduction; Preface; Section − 1 Introduction - nvent raychem tcontrol-cont-03 Operating And Installation Manual

1.

Introduction

1.1

Preface

Please read this manual before commissioning the device. Keep
the manual in a place accessible to all users at all times. Your
comments are appreciated and may assist us in improving this
manual.
All necessary settings are described in this operating manual.
Manipulations not described in the manual or expressly forbidden
will jeopardize your warranty rights. Please contact the nearest
subsidiary or the head office, should you encounter problems.
The manual is valid from device software version 223.01.04
Chapter 4.7 "Display of the software version"
Warning signs
DANGER!
This symbol indicates that Injury or death caused by electrical
shock can/may occur, if the respective protective measures are
not carried out.
CAUTION!
This symbol in combination with the signal word indicates
that Damage to assets or data loss will occur, if the respective
protective measures are not carried out.
Note symbols
TIP!
This symbol refers to an Important information about the product
or its handling or additional use.
REFERENCE!
This symbol refers to Further information in other sections,
chapters or manuals.
4 | nVent.com