nvent raychem tcontrol-cont-03 Operating And Installation Manual page 35

Parameters
Function key
short
tAS
(Push time
< 2 seconds)
Function key
long
tASt
(Push time
>2 seconds)
Level inhibit
(Setup)
Value /
Selection Description
Function if the key is briefly pressed in the
normal display (max. two seconds)
0 no function
1 Starting the timer
2 Timer abort
3 Stop timer/continue timer run
4 Timer start/abort
5 Display timer value (manual)
Function if the key is pressed for more than
two seconds in the normal display
0
Change to manual mode
1 Starting the timer
2 Timer abort
3 Stop timer/continue timer run
4 Timer start/abort
5 Display timer value (manual)
None Access to the individual levels can be
ConF inhibited.
PArA and Setting in the Setup program
ConF (-> Display/Operation/Service counter
OPr, PArA -> Operation):
and ConF - None
- Configuration level (ConF)
- Parameter (PArA) and configuration level
- Operator (OPr), parameter and configuration
level
The setting is independent of binary
function "Level inhibit".
When inhibiting the Parameter level, the
self-optimization start is simultaneously
inhibited.
nVent.com | 35