Hitachi SJ Series User Manual page 763

Appendix 1
Parameter mode (code o)
Code
Operation selection when option error
oA-10
occurs (slot 1)
Communication monitoring timer
oA-11
setting (slot1)
Operation setting at the time of
oA-12
communication error (slot1)
Selection of operation command
oA-13
behavior at start (slot 1)
Operation selection when option error
oA-20
occurs (slot 2)
Communication monitoring timer
oA-21
setting (slot 2)
Operation setting at the time of
oA-22
communication error (slot 2)
Selection of operation command
oA-23
behavior at start (slot 2)
Operation selection when option error
oA-30
occurs (slot 3)
Communication monitoring timer
oA-31
setting (slot 3)
Operation setting at the time of
oA-32
communication error (slot 3)
Selection of operation command
oA-33
behavior at start (slot 3)
*1) For details, refer to the instruction manual provided
together with the each optional cassette.
Code
ob-01 Encoder constant set-up (option)
Encoder phase sequence selection
ob-02
(option)
ob-03 Motor gear ratio's numerator (option)
ob-04 Motor gear ratio's denominator (option)
Pulse string input SA/SB (option)
ob-10
detection target selection
Pulse string input (option) mode
ob-11
selection
ob-12 Pulse string input (option) scale
Pulse string input (option) filter time
ob-13
constant
ob-14 Pulse string input (option) bias size
Pulse string input (option) upper
ob-15
detection limit
Pulse string input (option) lower
ob-16
detection limit
*1) For details, refer to the instruction manual provided
together with the each optional cassette.
Name
00 (Error)/01 (Continue operation)
0.00~100.00 (s)
00 (Error)/
01 (Trip after deceleration stop)/
02 (Ignore)/03 (Free run)/
04 (Deceleration stop)
00 (Operation command disabled)/
01 (Operation command enabled)
00 (Error)/01 (Continue operation)
0.00~100.00 (s)
00 (Error)/
01 (Trip after deceleration stop)/
02 (Ignore)/03 (Free run)/
04 (Deceleration stop)
00 (Operation command disabled)/
01 (Operation command enabled)
00 (Error)/01 (Continue operation)
0.00~100.00 (s)
00 (Error)/
01 (Trip after deceleration stop)/
02 (Ignore)/03 (Free run)/
04 (Deceleration stop)
00 (Operation command disabled)/
01 (Operation command enabled)
Name
32~65535 (pls)
00 (Phase-A is leading)/
01 (Phase-B is leading)
1~10000
1~10000
00 (Command)/
01 (Pulse string position command)
00 (90° phase difference)/
01 (forward/reverse rotation command
and rotation direction)/
02 (forward/reverse rotation pulse string)
0.05~200.0 (kHz)
0.01~2.00 (s)
-100.0~100.0 (%)
0.0~100.0 (%)
0.0~100.0 (%)
Appendix 1-52
Data range Initial value
Data range Initial value
List of Parameters
Note Page
00 *1)
1.00 *1)
01 *1)
00 *1)
00 *1)
1.00 *1)
01 *1)
00 *1)
00 *1)
1.00 *1)
01 *1)
00 *1)
Note Page
1024 *1)
00 *1)
1 *1)
1 *1)
00 *1)
01 *1)
25.00 *1)
0.10 *1)
0.0 *1)
100.0 *1)
0.0 *1)