Hitachi SJ Series User Manual page 58

Chapter 7 Chapter 7
7.3 Use the Backing Plate 7.3 Use the Backing Plate 7.3 Use the Backing Plate 7.3 Use the Backing Plate
!
・ ・When connecting wires to apply high voltage on the
connecting wires to apply high voltage on the connecting wires to apply high voltage on the connecting wires to apply high voltage on the connecting wires to apply high voltage on the
AL terminal, draw out the plate separately from the AL terminal, draw out the plate separately from the AL terminal, draw out the plate separately from the AL terminal, draw out the plate separately from the AL terminal, draw out the plate separately from the
wiring of control circuit. wiring of control circuit. wiring of control circuit.
Backing plate (i) Backing plate (i)
～P1-00600-LFF
P1-00330-LFF～ P1 LFF (P1-055LFF～
～P1-00310-HFF
P1 P1-00175-HFF～ HFF (P1-055HFF～
Backing pla Backing plate (ii)
～P1-01240-LFF
P1 P1-00800-LFF～ LFF (P1-150LFF～
～P1-00620-HFF
P1 P1-00400-HFF～ HFF (P1-150HFF～
▼
・Cut the connections between the unnecessary part ・
Cut the connections between the unnecessary part Cut the connections between the unnecessary part Cut the connections between the unnecessary part Cut the connections between the unnecessary part
and backing plate using nippers, radio pliers, or and backing plate using nippers, radio pliers, or and backing plate using nippers, radio pliers, or and backing plate using nippers, radio pliers, or and backing plate using nippers, radio pliers, or
cutter, to cut off the unnecessary part for wiring. cutter, to cut off the unnecessary part for wiring. cutter, to cut off the unnecessary part for wiring. cutter, to cut off the unnecessary part for wiring. cutter, to cut off the unnecessary part for wiring.
Backing plate (iii) Backing plate (iii)
P1-01250-L (P1- P1 -300L)～P1-01540 01540-L (P1-550L)/
P1 P1-00770-H (P1 (P1-300H)～P1-03610 03610-H (P1-1320H)
▼
1. When a conduit tube is not connected 1. When a conduit tube is not connected 1. When a conduit tube is not connected 1. When a conduit tube is not connected 1. When a conduit tube is not connected
Cut the rubber bushing to create a notch using Cut the rubber bushing to create a notch using Cut the rubber bushing to create a notch using Cut the rubber bushing to create a notch using Cut the rubber bushing to create a notch using
nippers or a cutter for wiring. nippers or a cutter for wiring. nippers or a cutter for wiring.
2. When a conduit tube is connected 2. When a conduit tube is connected 2. When a conduit tube is connected 2. When a conduit tube is connected 2. When a conduit tube is connected
Remove the rubber bushing in the portion where Remove the rubber bushing in the portion where Remove the rubber bushing in the portion where Remove the rubber bushing in the portion where Remove the rubber bushing in the portion where
a conduit tube is to be connected, and then a conduit tube is to be connected, a a conduit tube is to be connected, a a conduit tube is to be connected, a
connect the conduit tube. connect the conduit tube. connect the conduit tube.
Do not remove rubber busings from Do not remove rubber busings from Do not remove rubber busings from Do not remove rubber busings from
the wiring section unless a conduit the wiring section unless a conduit the wiring section unless a conduit the wiring section unless a conduit
tube is connected. Doing so may tube is connected. tube is connected.
Electric
shock
cause the edge of backing plate to cause the edge of backing plate to cause the edge of backing plate to cause the edge of backing plate to
Ground
damage the cable sheath, leading to damage the cable sheath, leading to damage the cable sheath, leading to damage the cable sheath, leading to
fault
short circuit short circuit or ground fault. or ground fault. or ground fault.
P1-110LFF)
～P1-110HFF)
P1-220LFF)
～P1-220HFF)
550L)/
1320H)
Doing so may
Wire Connection and Optional Devices Wire Connection and Optional Devices Wire Connection and Optional Devices Wire Connection and Optional Devices Wire Connection and Optional Devices Wire Connection and Optional Devices
Please contact the sales officer of our Please contact the sales officer of our Please contact the sales officer of our Please contact the sales officer of our
company for the latest information. company for the latest information. company for the latest information. company for the latest information.
・Backing plate (i)
Backing plate (i) Backing plate (i)
Wiring of
control circuit
Wiring of main
circuit
・Backing plate (ii)
Backing plate (ii) Backing plate (ii)
Wiring of Wiring of
control circuit control circuit
Wiring of main Wiring of main
circuit circuit
・Backing plate (iii)
Backing plate (iii) Backing plate (iii)
Backing plate
7-3
Connection Connection
Unnecessary part Unnecessary part Unnecessary part
Rubber bushing Rubber bushing