Hitachi SJ Series User Manual page 583

Chapter 16
16.2 "ProDriveNext"
Q
• Want to manage parameters by PC.
• Want to perform an automatic operation using the
program operation function.
• Want to check the monitor data graphically at the
time of error.
16.2.1 Connecting PC and inverter
• Install Hitachi's "ProDriveNext" to your PC.
• Connect the inverter and the PC using a USB able.
A Windows PC to
which "ProDriveNext"
has been installed.
What you can do with "ProDriveNext"
16.2.2
A
Parameter setting function
• You can configure various parameter settings such
as setting parameters individually and searching
parameters changed from the factory setting.
• Parameters can be stored and read as CSV file
format.
Monitor function
• You can set arbitrary parameters and conduct
monitoring accordingly.
• Monitor data can be stored and read out in the CSV
file format.
Trace function
• This function enables you to set parameters and
triggers in order to show data graphically at
occurrence of a trigger.
• Traced data can be stored and read as CSV file
format.
A
• With the PC tool "ProDriveNext", the following
functions are usable: wizard function for supporting
an operation setting; function for writing a parameter
to and reading out a parameter from a file; function
for creating a program and downloading to
inverters; function for tracing an error when it
occurs; etc.
• For installation procedure, see the instruction
manual of "ProDriveNext".
USB
A terminal
USB
Micro B
Functions for program operation (EzSQ)
• You can download the program to the inverter to
customize the inverter for you.
• With its BASIC-like entry-type or selection-type
programming function, EzSQ enables you to freely
designate input/output and operation stop of the
inverter.
• Programs can be stored and read out in the CSV file
format.
!
• For more details, see the instruction manuals of
"ProDriveNext" and EzSQ.
• "ProDriveNext" must be used under the following
conditions:
[CF-02] Communication station number selection is
set to "1";
[CF-11] Resister data selection is set to "00:(A,V)";
and
[CF-50] USB station number selection is set to "1".
16-2
ProDriveNext / EzSQ
SJ-P1