Hitachi SJ Series User Manual page 575

Chapter 15
Operation command behavior at start of option
Q
• Output
operation start-up
communication option is connected.
A
• When a communication option is used, if "00" is
selected for "operation command behavior at start
of option", an operation command is accepted after
connection with the communication option is
confirmed.
Parameter
Item
Selection of operation command
behavior at start of option (slot 1)
Selection of operation command
behavior at start of option (slot 2)
Selection of operation command
behavior at start of option (slot 3)
is slow when a
Parameter
[oA-13]
[oA-23]
[oA-33]
15-4
• If "01" is set for "selection of operation command
behavior at start of option", an operation command
is accepted without waiting for confirmation of
connection with the communication option. When a
communication option is used only for monitoring
power and an operation command is given using
input terminal function or the like, an output
operation may start faster by setting "01" for the
said selection.
Data
00 Operation command disabled
01 Operation command enabled
00 Operation command disabled
01 Operation command enabled
00 Operation command disabled
01 Operation command enabled
Optional Cassettes
Description