Hitachi SJ Series User Manual page 120

Chapter 9
9.10.2 Limiting Displayed Parameters
Q
・I want to display only the necessary parameters.
・I want to hide parameters not in use as much as
possible.
・I want to display only parameters that have been
changed.
Parameter
Item
Display selection
Selection of second
setting parameter display
Selection of whether to
display option parameter
User parameter selection
A
・I you are not using the input terminal function
[SET] for switching to the second setting, by
setting [UA-21] to 00, you can reduce a great
number of displayed items.
・I you are not using option cassettes, by setting
[UA-22] to 00, you can reduce indications for
option cassettes.
Parameter Data
[UA-10] 00
01
02
03
04
[UA-21] 00
01
[UA-22] 00
01
[UA-31] 255
~
*****
[UA-62]
9-25
A
・You can change the content of display on the
operator keypad according to your purpose.
・To know which parameters are changed, you can
check by setting [UA-10] to 03.
・If you do not want to display parameters for
functions not in use, you can reduce them by
setting [UA-10] to 01.
Description
All parameters are displayed.
Parameters are displayed by function. Disabled
functions are not displayed with some exceptions.
Display is performed in accordance with the settings
configured by the user. Parameters set to [UA-31] to
[UA-62] are displayed with some exceptions.
Parameters that have been changed from the factory
default settings and some other parameters are
displayed.
Monitor parameters and some other parameters are
displayed.
Hides parameters of second setting [**2**].
Displays parameters of second setting [**2**].
Hides parameters that start with o.
Displays parameters that start with o.
No assignment
Choose the code you want to display.
(all codes are subjected)
Operating Instructions