Hitachi SJ Series User Manual page 107

Chapter 9 Chapter 9
Example1) Change the [AA101] First main speed Example1) Change the [AA101] First main speed Change the [AA101] First main speed Change the [AA101] First main speed Change the [AA101] First main speed
command selection to [Ai1] terminal. command selection to [Ai1] terminal. command selection to [Ai1] terminal. command selection to [Ai1] terminal.
Set-up procedure up procedure
Output Frequency Output Frequency
AA101
First main speed command selection First main speed command selection First main speed command selection
07: Parameter set 07: Parameter set-up
AA101
First main speed command selection First main speed command selection First main speed command selection
01 [Ai1] terminal 01 [Ai1] terminal
02 [Ai2] terminal 02 [Ai2] terminal
03 [Ai3] terminal 03 [Ai3] terminal
Output Frequency Output Frequency
AA101
First main speed command selection First main speed command selection First main speed command selection
01: [Ai1] terminal 01: [Ai1] terminal
Example2) Example2) Change frequency command in [FA Change frequency command in [FA-01]. Change frequency command in [FA Change frequency command in [FA
(If the frequency command sele (If the frequency command sele (If the frequency command selection is (If the frequency command sele
"07: Parameter setting") "07: Parameter setting") "07: Parameter setting")
Set-up procedure up procedure
Output Frequency Output Frequency
FA-01
Output Frequency Output Frequency
FA-01
Output Frequency Output Frequency
FA-01
* The [Ai1] terminal is an The [Ai1] terminal is an analog input terminal The [Ai1] terminal is an
(voltage/current). (voltage/current). (voltage/current).
Action Action
3.4 3.4 Press the SEL(O) Press the SEL(O) key while [AA101] is
displayed. To 3.5. displayed. To 3.5.
0.00 Hz 0.00 Hz
(Tips) (Tips)
The information currently selected is shown in the The information currently selected is shown in the The information currently selected is shown in the The information currently selected is shown in the The information currently selected is shown in the
lower section. "07: Parameter setting" is currently lower section. "07: Parameter setting" is currently lower section. "07: Parameter setting" is currently lower section. "07: Parameter setting" is currently lower section. "07: Parameter setting" is currently
selected. selected.
3.5 Using the up and down ( 3.5
[Ai1] terminal", and then press the F2(2) key. [Ai1] terminal", and then press the F2(2) key. [Ai1] terminal", and then press the F2(2) key. To [Ai1] terminal", and then press the F2(2) key.
3.6.
(Tips) (Tips)
Data is saved when the F2(2) key is pressed. It is still Data is saved when the F2(2) key is pressed. It is still Data is saved when the F2(2) key is pressed. It is still Data is saved when the F2(2) key is pressed. It is still Data is saved when the F2(2) key is pressed. It is still Data is saved when the F2(2) key is pressed. It is still
saved even after the device is turned off. saved even after the device is turned off. saved even after the device is turned off. saved even after the device is turned off. saved even after the device is turned off.
When configuring an item, the entire screen changes When configuring When configuring
to the screen for setting the item. to the screen for setting the item. to the screen for setting the item. to the screen for setting the item.
3.6 3.6 To confirm if the data is correctly changed, check To confirm if the data is correctly changed, check To confirm if the data is correctly changed, check To confirm if the data is correctly changed, check To confirm if the data is correctly changed, check
the lower section. Press the F1(1) key to return
0.00 Hz 0.00 Hz
to the monitor. to the monitor.
(Tips) (Tips)
The information currently selected is shown in the The information currently selected is shown in the The information currently selected is shown in the The information currently selected is shown in the The information currently selected is shown in the
lower section. lower section.
"01 [Ai1] terminal" is currently selected. "01 [Ai1] terminal" is currently selected. "01 [Ai1] terminal" is currently selected. "01 [Ai1] terminal" is currently selected.
01].
ction is
Action Action
3.7 Press the SEL(O) key while [FA 3.7 Press the SEL(O) key while [FA Press the SEL(O) key while [FA-01] is displayed.
To 3.8.
0.00 Hz 0.00 Hz
(Tips) (Tips)
In [FA-01], the set In [FA 01], the set value can be changed if the string
inside () of main speed command indicates the inside () of main speed command indicates the inside () of main speed command indicates the inside () of main speed command indicates the inside () of main speed command indicates the
operator keypad or multi-step speed. In other cases, operator keypad or multi operator keypad or multi
0.00 Hz 0.00 Hz
it is set to the command monitor. it is set to the command monitor. it is set to the command monitor. it is set to the command monitor.
[0.00-60.00] 60.00]
3.8 3.8 You can change the right You can change the right You can change the right-most digit of data.
Change the value using the arrow ( Change the value using the arrow ( Change the value using the arrow (
keys, and then press the F2(2) key.
0.00 Hz 0.00 Hz
(Tips) (Tips)
In the figure on the right, base frequency is changed In the figure on the right, base frequency is changed In the figure on the right, base frequency is changed In the figure on the right, base frequency is changed In the figure on the right, base frequency is changed In the figure on the right, base frequency is changed
to 60.00Hz. Data is saved when the to 60.00Hz. Data is saved when the to 60.00Hz. Data is saved when the to 60.00Hz. Data is saved when the F2(2) key is
pressed. It is still saved even after the device is pressed. It is still saved even after the device is pressed. It is still saved even after the device is pressed. It is still saved even after the device is pressed. It is still saved even after the device is
60.00 Hz Hz
turned off. turned off.
[0.00-60.00] 60.00]
You can make adjustments while performing You can make adjustments while performing You can make adjustments while performing You can make adjustments while performing You can make adjustments while performing
monitoring. monitoring.
3.9 To confirm if the data is correctly changed, check 3.9
the lower section. Press the F1(1) key to return the lower section. Press the F1(1) key to return the lower section. Press the F1(1) key to return the lower section. Press the F1(1) key to return
0.00 Hz 0.00 Hz
to the monitor. to the monitor.
(Tips) (Tips)
The current frequency command is shown in the The current frequency command is shown in the The current frequency command is shown in the The current frequency command is shown in the The current frequency command is shown in the
lower section. lower section.
60.00 Hz 60.00 Hz
Currently, 60.00Hz is input as the command. Currently, 60.00Hz is input as the command. Currently, 60.00Hz is input as the command. Currently, 60.00Hz is input as the command. Currently, 60.00Hz is input as the command.
[0.00-60.00] 60.00]
9-12
Operating Instructions Operating Instructions Operating Instructions Operating Instructions
analog input terminal analog input terminal
key while [AA101] is key while [AA101] is
up and down ( up and down (
an item, the entire screen changes an item, the entire screen changes an item, the entire screen changes
lower section. Press the F1(1) key to return lower section. Press the F1(1) key to return lower section. Press the F1(1) key to return
value can be changed if the string value can be changed if the string value can be changed if the string
step speed. In other cases, step speed. In other cases, step speed. In other cases,
most digit of data.
, and then press the F2(2) key. , and then press the F2(2) key. To 3.9.
confirm if the data is correctly changed, check confirm if the data is correctly changed, check confirm if the data is correctly changed, check confirm if the data is correctly changed, check
) keys, select "01 ) keys, select
To
01] is displayed. 01] is displayed.
)
To 3.9.
F2(2) key is