Hitachi SJ Series User Manual page 188

Chapter 12
12.5 Selecting operation command
12.5.1 Types of operation commands
Ａ
• The operation command (operation modes)
selected in a function is enabled.
• For details, see the description in the next and
subsequent sections.
FW/RV terminal command (00)
3WIRE terminal command (01)
RUN key on the operator keypad (02)
RS485 communication (03)
Options 1-3 (04-06)
！
• The above shows an example of operation with
[AA111]=02 (RUN key on the operator keypad).
！
• The operation of the inverter requires not only an
operation command but also a frequency
command.
F-OP
selection
[CA-71]
(00~06)
Forced
01 operation
023 [F-OP]
ON
Operation
OFF
command
destination
[AA111]
(00~06)
03
• Functions not assigned to the input terminal
functions [CA-01]-[CA-11] become OFF.
12-5-1
Inverter Functions
Operation
command.