Hitachi SJ Series User Manual page 712

Appendix 1
Appendix List of Parameters
Contents
A1.1 What This Chapter Explains .......... Appendix 1-1
A1.2 How to View Parameters and Lists.. Appendix 1-1
A1.3 List of Monitor Modes .................... Appendix 1-3
A1.4 List of Parameter Modes ............... Appendix 1-8
A1.1 What This Chapter Explains
This chapter describes lists of monitors and
parameters as well as setting range of each
parameter and their initial values.
A1.2 How to View Parameters and Lists
Structure of parameter number
• A parameter consists of a parameter group, switch
recognition number assigned by the 024[SET]
terminal function, and an in-group number.
• If the switch recognition number assigned by
024[SET] terminal function is "-", it is enabled in
both first setting and second setting.
-: Always enabled in both the first setting and second setting
1: Enabled in the first setting when the [SET] terminal function is OFF
2: Enabled in the second setting when the [SET] terminal function is ON
AA 1 01
Parameter
Group
Appendix 1-1
• If the 024[SET] function is not set to the input
terminal functions [CA-01] to [CA-11], the first
setting is valid.
In-Group
Number
List of Parameters
Appendix