Rec Control - Sanyo DSR-3709 Instruction Manual

4 GENERAL SET
Recording control settings
1
Turn the jog dial to move cursor to

"REC CONTROL".

2
Turn the shuttle dial clockwise.
Turn the jog dial to select either "ADMIN" or "USER", and
then turn the shuttle dial clockwise.
The cursor moves to "CAMERA CONTROL."
Camera control settings
1
Turn the jog dial to move cursor to
"CAMERA CONTROL".
2
Turn the shuttle dial clockwise.
Turn the jog dial to select either "ADMIN" or "USER", and
then turn the shuttle dial clockwise.
This completes the setting procedure.
3
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT/OSD
English
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
CAMERA CONTROL : ADMIN
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
CAMERA CONTROL : ADMIN
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 ON
REC CONTROL : ADMIN
CAMERA CONTROL : ADMIN
91
Setting the security lock
LOCK indicator [MENU] button
1
With the normal monitoring screen
displayed, press the [SHUTTLE HOLD]
button for approximately 3 seconds.
The LOCK indicator on the front panel lights up and a
buzzer sounds to indicate activation of the security lock.
SHUTTLE HOLD
2
To confirm activation of this function,
press the [MENU] button.
A password entry screen appears for about 5 seconds.
Canceling the security lock
3
Enter your password while the
password entry screen is displayed.
Use the jog dial and the shuttle dial to perform this
procedure.
Enter the password set for administrators or users
(such as "123456AB").
Be sure to enter the correct password for the operation
(s) to be carried out. ( P.89)
4
Turn the shuttle dial clockwise.
The security lock is cancelled and the display returns to
the normal screen.
[EXIT/OSD] button
[SHUTTLE HOLD] button
SECURITY LOCKED !
PLEASE ENTER YOUR PASSWORD
________
CHANGE:JOG SET:SHUTTLE