Contents 1 NAMES AND FUNCTIONS OF PARTS ..1 Front panel ............. 1 1 PREPARING FOR USE........4 Operation display area........4 Changing the position of the operation display area............5 See “INSTRUCTION MANUAL” for menu settings Changing the language........5 or details of the operation.
An alarm will be sounded if a button is pressed in this display mode is adopted. condition. In addition, a password entry screen will be The DSR-3709P can only display video in nine screens. displayed on the monitor at this time. 10. [MON2] button and indicator...
Playback can be resumed by pressing this button For DSR-3709P, this operation is available only when in once again. multi 9 screen display. 18. [SEQUENCE] button and indicator The [SEQUENCE] button can be pressed during 12.
For recommended recordable drives, check the Sanyo 23. [ALARM] buttons homepage or ask at your local Sanyo dealer. When an [ALARM] button is pressed during playback or Sanyo website URL: still, the digital video recorder skips to the next earlier or http://www.sanyosecurity.com...
PREPARING FOR USE [MENU] button [EXIT/OSD] button Shuttle dial CARD CARD MENU RESET EJECT [REC/STOP] button Jog dial Operation display area During simultaneous recording and playback, the display indicates playback ( Whenever the power is turned on, the operation display area will be shown at the top of the monitor screen.
PREPARING FOR USE When a motion sensor alarm signal is Changing the language activated; “SA” is flashed to the left of the camera number. Use the following procedure to set the language displayed When an external alarm signal and motion on the monitor.
PREPARING FOR USE Turn the shuttle dial clockwise, and Turn the shuttle dial clockwise. then turn the jog dial to select the The <LANGUAGE/LANGUE/SPRACHE/IDIOMA> screen desired language. is displayed. The set item flashes. <LANGUAGE/LANGUE/SPRACHE/IDIOMA> ENGLISH <REGL.LANGUE> <CLOCK SET> FRANCAIS 01-01-2004 THU 00:00:00 <REGL.HORLOGE>...
Each time this button is pressed, the four images on the quad screen change, in order of cameras No. 1-4, 5-8, 9- 12 and 13-16. On the DSR-3709P, the images change in order of cameras No. 1-4, 5-8, 9-3, etc. QUAD To return to full screen display, press the [CAMERA SELECT] button.
Enlarge one camera video to quad screen size to view in multi 6/13 screen display. Press the [MULTI] button. For DSR-3709P, this operation is available only when in The MULTI indicator lights up and video from nine multi 9 screen display.
RECORDING FULL indicator ALARM FULL indicator [EXIT/OSD] button POWER indicator CARD CARD MENU RESET EJECT [REC/STOP] button [TIMER] button Normal recording Ending normal recording Press and hold the [REC/STOP] button Use the following procedure to record the monitored video in the normal recording area. for approximately 3 seconds.
RECORDING When an alarm signal is detected When the space remaining in the normal recording area When an alarm signal is detected, “ALARM” flashes in drops below a preset value, the FULL indicator on the the operation display and the alarm recording starts digital video recorder’s front panel starts to flash.
RECORDING Normal recording easy setup Use the following procedures to make simple recording settings. Two different setting methods may be used -- one based on recording days; the other based on recording rate. Before making easy setup settings, connect the camera(s) to the digital video recorder and then always perform “CAMERA DETECT”.
PLAYBACK Use the following procedure to play video stored in the normal recording area (during normal or timer recording). POWER indicator [ZOOM] button [PLAY/STOP] button Normal Shuttle dial recording area CARD CARD Jog dial MENU RESET EJECT [QUAD] button [MULTI] button [STILL] button [CAMERA SELECT] buttons [SHUTTLE HOLD] button...
PLAYBACK Performing frame advance (forward or reverse) Turn the jog dial clockwise or counter- clockwise while playback is paused. Clockwise: The still image is moved forward by one frame or field. Counter-clockwise: The still image is moved back by one frame or field.
SEARCHING FOR RECORDED VIDEO Images stored in the normal recording area, alarm [SEARCH] button recording area or archive area can be located by searching Shuttle dial and can then be played back. Use one of the following five search methods to locate the required video. Archive area CARD CARD...
SEARCHING FOR RECORDED VIDEO Turn the shuttle dial clockwise. To view alarm video before or after the current playback The nine most-recent alarm recordings are displayed. An alarm number is indicated together with each alarm Press the appropriate [ALARM] button recording, and the number of the currently selected during playback.
SEARCHING FOR RECORDED VIDEO Example: To search for a recording from camera 5 Time/date search from 8:30 pm on 26 October 2004 Use the following procedure to play a recording from the <TIME/DATE SEARCH> normal recording area (i.e., a normal recording or timer RECORDING TOP : 01-10-04 14:46 RECORDING END : 30-10-04 13:32 recording) or alarm recording area by specifying its date...
SAVING (COPYING) RECORDED VIDEO Turn the jog dial to select “COPY TO”, Copying video to a CompactFlash and then turn the shuttle dial clockwise. card or Microdrive “ARCHIVE AREA” flashes. Use the following procedure to copy video either to a Microdrive and to a CompactFlash card (Supported up to 2 GB).
INDEX.HTM COPY FINISHED ! < 100% > (1) A folder with the name “SANYO” is created inside the root directory. To cancel a copy operation (2) Within "SANYO," a folder with the date on which Press the [COPY] button to cancel the current copy.
(2) Within “DCIM,” a folder with the date on which images COPY TO : CF->PRINT were copied to is created. HOW MANY: 1 PICTURES START -> Use the “DVP-P1” Sanyo Digital Photo Printer. If another printer is used, Sanyo cannot be responsible for failures in performance or operation. English...
SAVING (COPYING) RECORDED VIDEO Pause playback on the image to be copied, and then press the [COPY] If the location of the date needs to be moved when button. printing, change operation display area at copying. ( P.5) The <COPY> screen is displayed. When date is hidden, it is not printed.
COMPACT FLASH (1) CD-R/RW disc is named “SANYOCDR.” FORMAT START -> (2) A folder with the name “SANYO” is created inside “SANYOCDR.” Turn the shuttle dial clockwise. (3) Within "SANYO," a folder with the date on which images were copied to is created.