Sanyo DSR-3709 Instruction Manual page 81

3 RECORD SET
2
Turn the jog dial to change "OFF" to
"ON", and then turn the shuttle dial
clockwise.
A message appears indicating automatic rate adjustment.
"NO" flashes.
[Settings] ( indicates default setting)
Setting
OFF Pre-alarm recording is not carried out.
ON Pre-alarm recording is carried out.
3
Turn the jog dial to select "YES" for
warning message, and then turn the
shuttle dial clockwise.
The cursor moves to recording rate and duration.
4
Turn the shuttle dial clockwise.
"REC RATE" for "PRE-ALARM RECORDING" flashes.
5
Turn the jog dial to set "REC RATE" (30
FPS, for example), and then turn the
shuttle dial clockwise.
(Default setting: 15 FPS)
"DURATION" for "PRE-ALARM RECORDING" flashes.
ALARM RECORDING
PICTURE QUALITY
AUDIO RECORDING
ALARM INTERLEAVE
PRE-ALARM RECORDING
ALARM TRIGGER
Description
<WARNING>
REC RATE SETTING IN THE MENU WILL BE
AUTOMATICALLY ADJUSTED.
ARE YOU SURE ?
YES
CHANGE:JOG SET:SHUTTLE
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: A 15FPS, DURATION: 1MIN
=> (00229 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
<ALARM REC MODE SET>
: ENABLED
: ENHANCED
: ON
: ONLY
REC RATE: A 15FPS, DURATION: 20SEC
: ON
REC RATE: A 30FPS, DURATION: 1MIN
=> (00229 ALARMS CAN BE RECORDED)
: ALARM
MOTION SENSOR ->
6
Turn the jog dial to set "DURATION" (10
SEC for example), and then turn the
shuttle dial clockwise.
(Default setting: 1 MIN)
The cursor moves to "ALARM TRIGGER".
When pre-alarm recording settings have been
completed
7
Press the [EXIT/OSD] button.
EXIT/OSD
The setting procedure is ended and the display returns to
the normal screen.
"PRE" appears in the operation display area. When an
alarm occurs, "ALARM" is displayed.
Number of alarm
PRE display
01-01-04 00:00:00 REC REPEAT EN A PRE 0000
Pre-alarm recording is carried out over the period
before alarm input as set by "DURATION". In order to
playback pre-alarm recordings, carry out alarm search
(using the [SEARCH] button). ( P.31)
As playback begins at the point of alarm occurrence,
use the shuttle dial to move back into the area of pre-
alarm recording.
When normal recording and pre-alarm recording are
performed simultaneously, audio will not be recorded
together with pre-alarm video.
80
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: A 30FPS, DURATION: 10SEC
=> (00694 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
02
English