Sanyo DSR-3709 Instruction Manual page 99

4 GENERAL SET
4
Turn the jog dial to select a protocol and
then turn the shuttle dial clockwise.
The "ADD." column flashes.
[Settings] ( indicates default setting)
Setting
OFF Camera control is disabled.
Camera control is enabled using
SANYO COAX SANYO (SSP) protocol coaxial super-
imposition.
Camera control is enabled using
SANYO RS485
SANYO (SSP) protocol RS-485.
Camera control is enabled using BBV
BBV COAX
protocol.
Camera control is enabled using
PELCO COAX
PELCO protocol.
5
Set address (1 to 127) with the jog dial
or numeric keys and turn the shuttle
dial clockwise.
Address can be set only for "SANYO COAX" or "SANYO
RS485" protocols.
6
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT/OSD
<CAMERA CONTROL SET> K
CH PROTOCOL ADD. | CH PROTOCOL ADD.
01 SANYO COAX --- | 09 OFF ---
02 OFF --- | 10 OFF ---
03 OFF --- | 11 OFF ---
04 OFF --- | 12 OFF ---
05 OFF --- | 13 OFF ---
06 OFF --- | 14 OFF ---
07 OFF --- | 15 OFF ---
08 OFF --- | 16 OFF ---
Description
<CAMERA CONTROL SET>
CH PROTOCOL ADD. | CH PROTOCOL ADD.
01 SANYO COAX 011 | 09 OFF ---
02 OFF --- | 10 OFF ---
03 OFF --- | 11 OFF ---
04 OFF --- | 12 OFF ---
05 OFF --- | 13 OFF ---
06 OFF --- | 14 OFF ---
07 OFF --- | 15 OFF ---
08 OFF --- | 16 OFF ---
Camera control is only available for camera models
supporting coaxial control or SANYO SSP control.
Other companies' cameras such as RS-485 and RS-
422 are unsupported. For supported cameras, check
the Sanyo homepage or ask at your local Sanyo dealer.
Sanyo website URL:
http://www.sanyosecurity.com
98
English