Canceling Alarms - Sanyo DSR-3709 Instruction Manual

3 RECORD SET
2
Turn the jog dial to set "MAIN MON.
DISPLAY", and then turn the shuttle dial
clockwise.
The cursor moves to "ALARM PRIORITY".
3
Turn the shuttle dial clockwise and turn
the jog dial to set "ALARM PRIORITY",
and then turn the shuttle dial clockwise
once again.
The cursor moves to "MON.2 DISPLAY".
[Settings] ( indicates default setting)
Setting
When a number of alarms are occurring, the most-
LAST
recent alarm video is given priority.
When a number of alarms are occurring, only the
video for the first alarm is displayed. However, if
FIRST
the duration for the alarm with the first input
expires, video for the next alarm will be displayed.
When a number of alarms are occurring, the
display switches between the video from the
SWITCH
corresponding cameras, showing each for one
second.
After an alarm duration has ended, the display returns
to the screen prior to alarm input.
4
Turn the shuttle dial clockwise and turn
the jog dial to set "MON.2 DISPLAY"
(ON/OFF), and then turn the shuttle dial
clockwise.
The cursor moves to "ALARM RETRIGGER".
[Settings] ( indicates default setting)
Setting
When an alarm occurs, the corresponding video is
ON
displayed on the monitor 2.
OFF No alarm video is displayed on the monitor 2.
5
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT/OSD
English
Description
Description

Canceling alarms

To forcibly cancel an alarm during alarm operation, press
the [CAMERA SELECT] button for the camera inputting
the alarm and hold it for approximately 3 seconds.
Alternatively, connect a switch between the alarm reset
terminal and C (the grounded terminal), and turn on the
switch to cancel any alarm that is occurring.
C
85
ALARM
RESET