DVR. Copyright information This manual is work of Sanyo Electric Co., Ltd. Windows and Internet Explorer are trademarks or registered trademarks of Microsoft Corporation USA in the USA and in other countries. Pentium is a trademark or registered trademark of Intel Corporation USA and associated companies in the USA and in other countries.
Network Connection Procedure To operate the DVR through a network, first setup the DVR and computer and then perform the predetermined connection operations using the computer. 1 NETWORK SET Settings of DVR 2 TCP/IP Settings of the Computer Select NETWORK SET from the main menu of the DVR and Setup TCP/IP according to each OS for the computer being make the following settings to allow the DVR to work with a used.
Page 5
Network Connection Procedure Right click the settings of the LAN card being Select [Use the following IP address] and then used (Ethernet adapter) and the select enter an IP address and subnet mask. [Properties] from the menu. The [General] tab of [Local Area Connection Properties] will display.
Network Connection Procedure 3 Network Operation Screen Display When the DVR and computer settings are complete, start the Web browser on the computer. The browser should be Internet Explorer Ver. 5.5 SP2 or higher. If the computer accesses the DVR following the procedure below, the screen will change to the network operation screen. Enter the connection URL in the address bar Select a display language from the network of the browser.
Network Connection Procedure b Network Connection Restrictions b Change to DVR Operation Connections are restricted depending on the connections If the disconnect button on the operation panel is clicked, state of users and the content of the network settings. If a the network connection will disconnect and the DVR can be DVR cannot be connected, confirm whether the connection operated.
Organization of the Main Screen and Functions of Each Part The main screen will display when the network connection is completed. The main screen consists of three panels. The operation panel is where you can perform basic operations, such as monitoring live video, recording, and playback. b Organization of Main Screen Camera title 1 Operation panel (Refer to P8)
Organization of the Main Screen and Functions of Each Part 1 Functions of Operation Panel and Operation Authority Click a button on the operation panel to perform operation through the network from the computer. • The organization of the buttons on the operation panel differs depending on the DVR model. •...
Organization of the Main Screen and Functions of Each Part 2 Operating mode display panel Information required for network operation is displayed in this panel in response to the display image. A For live video 1 Image classification 4 ALARM RECORDING MODE "LIVE"...
View Live Video If you change to network operation, live video will be automatically displayed in the image display panel of the main screen. Click in the operation panel during playback or when another operation screen is displayed. 1 Change display pattern of live video (ID1/2/3) The display pattern of live video can be selected from full screen (specific channel), quad-screen, or multi-screen.
View Live Video 2Set the display mode for images (ID1/2/3) 3Playback audio (ID2/3) You can set the display mode for live video and played back You can playback live and audio of reproduced audio at the images. Select a setting value from the pull-down menu of same time.
Recording Monitored Images (User level: ID3) You can record images while they are being monitored onto the hard disk of the DVR. There are four methods to record, normal recording, timer-controlled recording, alarm recording and pre-alarm recording. The stored images are recorded on each recording area in response to the operation. •...
View Recorded Images (User level: ID2/3) You can freely playback images recorded in the DVR. There is no effect on the recording operation of the DVR even when playing back recordings. Operation panel b Playback Recorded Images b Basic Playback Operations •...
Search Recorded Images (User level: ID2/3) You can search and playback specific images from image data recorded in each recording area of the DVR. ALARM SEARCH (Search menu) The following five search menus are available in accordance with the search objective. •...
Search Recorded Images (User level: ID2/3) TIME/DATE SEARCH ARCHIVE AREA SEARCH Click "4. ARCHIVE AREA SEARCH" in the search menu. The ARCHIVE AREA SEARCH screen displays. Click "3. TIME/DATE SEARCH" in the search Click the image number of the list. menu.
Search Recorded Images (User level: ID2/3) MOTION DETECTION SEARCH Set the detection points for motion. (MOTION SENSOR SET) The setting frame of the motion detection point will display in the PREVIEW screen as an 8 (vertical) x 10 (horizontal) square. If you click over the square, a red mark will display and be set to a motion detection point.
Saving Images (User level: ID2/3) This software offers three image storage methods. Select the storage method according to your purpose. • Saving live video on the computer • Copying recorded images to the DVR’s archive area (Refer to P18) • Downloading recorded images to the computer (Refer to P19) •...
Saving Images (User level: ID2/3) B Copying Recorded Images to the DVR’s Archive Area Copying the images that are recorded in the normal recording area and the alarm recording area to the DVR's archive area If the [OVERWRITE] setting is set to "ON", the DVR will overwrite the previously recorded images sequentially once the recording area is full.
Saving Images (User level: ID2/3) C Downloading Recorded Images to the Computer Downloading DVR recorded images to the drive of a networked computer. Playback the images you want to download Check the box of the channel you want to and click the channel selection button. download from.
Saving Images (User level: ID2/3) D Saving Format for Image Files The format (structure) of files downloaded to the computer using the "SAVE TO PC" or "DOWNLOAD" operations is as follows. The data is saved in a 3 layer structure in the specified Specified destination folder destination folder.
Operating a Dome Camera (User level: ID2/3) When connecting a coaxial superimposed dome camera, you can operate the camera by remote control using the computer. To do that, change the operation panel to the camera control panel. • The camera control function is only available on 9/16-channel models. •...
Setting up the Basic Menu Using Network Operations (User level: ID3) The DVR operating condition is usually set through the DVR. However, the following basic operation menu allows you to set the DVR using the computer. Basic Settings Menu Outline b Initial setting b General settings A CLOCK SET (Refer to P24)
Setting up the Basic Menu Using Network Operations (User level: ID3) Basic menu setting procedure Click in the operation panel. Setting the contents of each menu. The MAIN MENU screen is displayed. The current setting information of the DVR is loaded and displayed on the screen.
Initial setting (User level: ID3) CLOCK SET HOLIDAY SET Setting the internal clock of the DVR. Dates set as national holidays, anniversaries, etc are considered as holidays and timer recording operations will Set the day/month/year/hour/minute using the pull down be the same as for Sundays. menu.
Recording settings (User level: ID3) RECORDING AREA SET 2 [AREA FULL RESET] button The proportion of each recording area on the internal HDD is displayed. Recording operations will stop once the This button is displayed depending on the settings of recording area is full.
Recording settings (User level: ID3) RECORDING CONDITIONS SET 3 SERIES REC (Initial setting: OFF) It allows you to set HDD recording area management conditions such as overwrite recording, remaining disk Series recording can be set if the multiple DVR units are warning level, automatic erase function, etc.
Recording settings (User level: ID3) NORMAL REC MODE SET 3 REC RATE (Initial setting: 12.5 FPS) It allows you to set the recording conditions of the normal recording and timer-controlled recording of the DVR. To set the recording rate for normal recording. The quality of the image depends on "image quality x The letter "A"...
Recording settings (User level: ID3) PROGRAM REC SET TIMER SET If multiple cameras are connected to the DVR, the recording It allows you to set the recording conditions for timer rate of each camera can be set individually. recording. 4 recording settings can be preset (P-1 - P-4). Pre-programed settings can be used for NORMAL REC MODE SET and TIMER SET.
Page 30
Recording settings (User level: ID3) b Example of timer-controlled recording Recording at the same time every day using timer recording Set the timer-controlled recording conditions based on the following example. Example: Recording every day from 10:00 to 20:00 using To operate the timer recording click in the operation the "P-1"...
Recording settings (User level: ID3) ALARM REC MODE SET It allows you to set the alarm recording and the pre-alarm recording conditions. 1 ALARM RECORDING (Initial setting: OFF) 4 ALARM INTERLEAVE (Initial setting: ONLY) To set the alarm recording operation mode. Setting the recording pattern when multiple cameras are connected to the DVR.
Page 32
Recording settings (User level: ID3) ALARM REC MODE SET (Continued) 5 PRE-ALARM RECORDING Allows you to set the pre-alarm recording operation mode. Activates pre-alarm recording. OFF: Pre-alarm recording is not activated. If the alarm recording operation mode is set to "OFF", "***"...
General settings (User level: ID3) DISPLAY SET BUZZER SET It allows you to select what is displayed on the monitor that It allows you to choose to activate the warning buzzer of the is connected to the DVR. DVR for the remaining disk warning, the alarm, etc. It is not related to the main screen of the computer.
General settings (User level: ID3) b Setting the buzzer using the computer HDD SET Displays the HDD information of the DVR unit. A Activating the buzzer using the computer when Specifies the disk used to play back mirroring recordings. the alarm is triggered Create a "BUZZER"...
General settings (User level: ID3) NETWORK SET RS-485 SET The NETWORK SET allows you to set the network before Displays the interface information set through the DVR the DVR is connected to it. The menu on this screen when using the system controller operations. enables you to change DVR settings through the computer.
Screen settings and DVR information (User level: ID3) MASK SET POWER LOSS/USED TIME A grey pattern can be set on a specified channel used to watch Displays the information concerning power loss/used time live video or play back images to protect confidentiality and and firmware version information.
• Available languages: English or Japanese 1 Running DVR Viewer2. To run Viewer, double click the shortcut icon on the desktop or choose [Program] → [SANYO] → [DVR b Installing the Viewer Software Viewer2] from the start menu. Follow the procedure below to install the software before using it.
DVR Viewer2 b Structure of the Screen and the Function of each Section Running the Viewer software will result in the initial screen of the Viewer being displayed. Initial screen 1 Menu bar 2 Toolbar This is the basic menu of the Viewer software. Click each Frequently used command bars are deployed.
DVR Viewer2 b Opening Iimage Files The image files are not displayed when the Viewer Software is run. Specify and open the playback file through the procedure below. Click in the toolbar. Verify the displayed folder and click [OK]. Or, click "Open" in the file menu. The image file loads.
DVR Viewer2 b Switching the Display Pattern of the Screen b Selecting the Channel Displayed on the Screen The image display pattern can be selected from 4 patterns: full screen, quad screen, 9 screen, 16 screen using the Right clicking the Viewer screen will display the context toolbar button.
DVR Viewer2 b Functions of the Viewer Operating Panel The audio and image functions of the Viewer screen can be operated. (Viewer Operating Panel) 1 Playback slide bar 4 Audio adjusting section The time stamp (recording date and time) of the start Allows you to turn on/off and adjust the volume of the and stop point of the playback file are displayed at both audio playback when a playback file contains audio data.
DVR Viewer2 b Saving and Printing Images b Setting the Date and Time Display Format To save or print the image currently being displayed, switch Clicking the "Date Display Format" will display the [Date to "Full screen display" and perform the following Display Format] dialog.