Table of Contents
Advertisement
Menu Setting Procedures
3. PROGRAM REC SET
When more than one camera is connected to the digital video recorder, the camera rate (unique rec
rate for each camera) can be set separately for each camera. In addition, you can make up to four
programs that include settings such as the method of combining the images from each recording
camera and individual camera rates. You can specify the appropriate program when making [TIMER
SET] and [RECORDING MODE SET] menu settings.
1
Use the menu (1) to specify a program number.
P-1 to P-4
2
Use the menu (2) to specify the cameras that
are to be used for recording from the numbers of
the connected cameras that are being displayed
on the screen (DSR-3009 model: 1-9; DSR-3016
model: 1-16), and set the camera rate for each
camera selected.
• If a camera is not to be recorded: Select "OFF".
• If a camera is to be recorded: Set the camera rate.
Default setting
DSR-3009 model: 0.463 FPS
DSR-3016 model: 0.26 FPS
The camera rate values that appear in the menu
lists will vary depending on the number of
channels connected. The maximum value for REC
RATE in PROGRAM REC mode is 25 fps, so the
values in the table will be this maximum value
divided by the number of channels, and comprises
the upper limit for the setting.
3
Click [SAVE] to complete the setting.
When the setting is completed, the available time for
normal recording and the number of alarm recordings that
are possible under the conditions that have been set will be
displayed for reference (
4
You can repeat the above procedure to program
up to a maximum of four different patterns.
English
3
).
1
2
3
Screen example for DSR-3009 model
1
2
3
Screen example for DSR-3016 model
9
Advertisement
Table of Contents
