Setting And Initializing The Hard Disk - Sanyo DSR-3709 Instruction Manual

4 GENERAL SET
If an administrator password was entered, the security
lock is cancelled and the indicator is turned off.
If a user password was entered, the security lock is
partially cancelled and the indicator remains lit.

Setting and initializing the hard disk

This section describes how to initialize and expand the
hard disk.
When a single hard disk is installed, the hard disk capacity
is displayed for DISK 1; when two hard disks are installed,
the capacity is displayed for "DISK 1" and "DISK 2".
Initializing the hard disk
1
Press the [MENU] button and turn the
jog dial to select "3. GENERAL SET",
and then turn the shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
MENU
2
Turn the jog dial to select "4. HDD SET",
and then turn the shuttle dial clockwise.
The <HDD SET> screen is displayed.
The cursor moves to "DISK INITIALIZE".
3
Turn the shuttle dial clockwise.
<WARNING> screen is displayed. "NO" flashes.
<HDD SET>
DISK1 : 82GB
DISK2 : ---GB
DISK INITIALIZE ->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING : OFF
PLAYBACK DRIVE : ***
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING!
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
4
Turn the jog dial to select "YES".
5
Turn the shuttle dial clockwise.
The "HDD INITIALIZING!" screen is displayed, and the
hard disk is initialized.
When initialization has been completed, the display
returns to the <HDD SET> screen.
6
Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
EXIT/OSD
Initialization of hard disk erases all contents.
92
HDD INITIALIZING !
English