Module - 2N Helios IP Verso Installation Manual

Part No. 9155036
®
2N
electronic buttons
Not available yet - A module
with 5 electronic buttons for
quick dialling from the
phonebook. Use the arrow
buttons to browse through
every 5 phonebook positions
and press
the name in the current set
of five positions to dial.
Part No. 9155039
(One blind module is
supplied with the main unit.)
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Helios IP Verso –
the button next to
Blind module
Part No. 9155037
®
2N Helios IP Verso
– Wiegand module
The module helps you
interconnect your
system with other
systems via the
Wiegand interface. The
module is installed
under another module,
i.e. needs no separate
position.
Part No. 9155040
®
2N Helios IP Verso
– RFID Card Reader, 13
MHz, NFC ready
The card reader module
provides you with
access control via
contactless cards or
keyfobs. The module
supports the following
13.56 MHz cards or
other carriers (only
card serial number is
read):
ISO/IEC 14443A Mifa
re Classic 1k & 4k,
DESFire EV1, Mini, Plus
S&X, Ultralight,
Ultralight C
ISO/IEC 14443B CEP
AS, HID iCLASS
JIS X 6319 Felica
ISO/IEC 18092 Smart
Phone with NFC/HCE
support, since Android
version 4.3
Part No. 9155038
®
2N Helios IP Verso –
Tamper Switch
The module secures your
system against tampering by
detecting intercom opening
or top frame removing. The
module is installed on a
special place and needs no
separate position.
Part No. 9155041
Induction Loop module
The induction loop module is
used to transmit an audio
signal directly into a hearing
aid via a magnetic field.
9