Basic Unit; Wiegand Module - 2N IP series Automation Manual

2N ® IP Verso

Basic Unit

Outputs
output1 – digital output
relay1 – relay output
led_secured – red LED indicator at the panel
Inputs
input1 – digital input on basic unit
I/0 Module
The inputs / outputs are addressed as follows:
e.g. module5.relay1.
The module name is configured in the Module name parameter in the Hardware /
Extenders menu.
Outputs
relay1 – relay output 1
relay2 – relay output 2
Inputs
input1 – digital input 1
input2 – digital input 2
tamper – tamper switch (if installed)

Wiegand Module

The input is addressed as follows:
tamper
The module name is configured in the Module name parameter in the Hardware /
Extenders menu.
Outputs
output1 – output LED OUT
Inputs
input1 – vstup LED IN
2N TELEKOMUNIKACE a.s., www.2n.cz
<module_name>.<input/output_name>
<module_name>.<input_name>
,
, e.g. module2.
93/104