Module - 2N Helios IP Verso Installation Manual

Surface mounting
concrete and steel structures, entry barrier columns,
interior, etc.
What you need for mounting:
2N
1× module: frame Part No. 9155021
2× modules: frame Part No. 9155022
3× modules: frame Part No. 9155023
For not flat surface use
te Part No
Caution
General Mounting Principles
Tip
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Helios IP Verso plus the respective frames
according to the module number
9155061 - 9155067
The warranty does not apply to the product defects and failures arisen as
a result of improper mounting (in contradiction herewith). The
manufacturer is neither liable for damage caused by theft within an area
that is accessible after the attached electric lock is switched. The product
is not designed as a burglar protection device except when used in
combination with a standard lock, which has the security function.
When the proper mounting instructions are not met, water might get in
and destroy the electronics. It is because the communicator circuits are
under continuous voltage and water infiltration causes an electro-chemical
reaction. The manufacturer's warranty shall be void for products damaged
in this way!
Select flush mounting where possible to make your product elegant
looking, more vandal resistant and more secure.
You are advised to buy the flush mounting boxes in advance and
commission your building company to do the masonry for you. This
approach helps you put your intercom exactly in the vertical position.
backpla
33