2N Helios IP Verso Installation Manual page 109

RELAY1
RELAY2
IN1
IN2
TAMPER
5-Button Module
The 5-button module (Part No. 9155035) is one of the
elements and is used for extending the number of buttons.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
Nametag dimensions:
Refer to
®
2N TELEKOMUNIKACE a.s., www.2n.cz
RELAY1 terminals with accessible 30 V / 1 A AC/DC NO/NC contact
RELAY2 terminals with accessible 30 V / 1 A AC/DC NO/NC contact
IN1 terminals for input in passive/ active mode (−30 V to +30 V DC)
OFF = open OR U
IN
ON = closed contact OR U
IN2 terminals for input in passive/active mode ( 30 V to +30 V DC)
OFF = open OR U
IN
ON = closed contact OR U
Tamper switch (9155038) input
2N
1 button: 52,0 (W) x 15,2 (H) mm (dimensional tolerance: +0; - 0,5 mm).
5 buttons: 57,5 (W) x 89,0 (H) mm (dimensional tolerance: +0; - 0,5
mm).
www.2n.cz for nametag printing template.
> 1.5 V
< 1.5 V
IN
> 1.5 V
< 1.5 V
IN
2N
®
Helios IP Verso bus connectors.
−
®
Helios IP Verso intercom
109