2N Helios IP Verso Installation Manual page 106

It is obvious from the specimen configuration that all the modules have sufficient
outputs when an external power supply is used. When a PoE supply is used, the power
output is insufficient for all the modules, which results in automatic decrease in
backlight level, active output current supply, volume and LED intensity. Some modules
need a specific power output for their specific activities: the I/O module, e.g.,
requires 0.13 W for relay closing (not calculated for minimum consumption).
Infopanel Module
The Infopanel module (Part No. 9155030) is one of the
elements and is used for inserting and backlighting printed information.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
Nametag dimensions: 69,2 (W) x 86,7 (H) mm (dimensional tolerance: +0; - 0,5
mm).
Refer to
Keypad Module
The Keyboard module (Part No. 9155031) is one of the
elements and provides a numerical input in the system.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
RFID Card Reader Module 125 kHz
The 125 kHz RFID Card Reader (Part No. 9155032) is one of the
Verso
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4100, EM4102, HID Proximity
®
2N TELEKOMUNIKACE a.s., www.2n.cz
www.2n.cz for printing template.
intercom elements and is used for reading RFID card Ids in the 125 kHz band.
®
2N Helios IP Verso
®
2N Helios IP Verso
®
2N Helios IP Verso
®
2N Helios IP Verso
bus connectors.
®
2N Helios IP Verso
bus connectors.
®
2N
bus connectors.
intercom
intercom
Helios IP
106