Configuration - 2N Helios IP Verso Installation Manual

3.1 Configuration

Configure
Launch your internet browser (Internet Explorer, Firefox, etc.).
Enter the IP address of your intercom (http://192.168.1.100/, e.g.).
Log in using the username
You have to know your intercom IP address to log in to the integrated web server.
Upon purchase,
retrieves the IP address automatically if there is a properly configured DHCP server in
the LAN. If no DHCP is available, operate
mode. Refer to the
n details.
If your device remains inaccessible (you have forgotten the IP address, the network
configuration has changed, etc.), you can change the network configuration using the
device buttons.
IP Address Retrieval
Take the following steps to retrieve the
Connect (or, if connected, disconnect and reconnect)
the power supply.
Wait for the second sound signal
Press the quick dial button on the main unit 5 times.
2N
If the address is 0.0.0.0, it means that the intercom has not obtained the IP
address from the DHCP server.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Helios IP Verso
®
2N Helios IP Verso
Configuration Manual
®
Helios IP Verso will read its IP address.
using your PC with any internet browser:
Admin and password
is set to the dynamic IP address mode – it
®
2N Helios IP Verso
for the 2N
®
2N Helios IP Verso
.
2n .
in the static IP address
®
Helios IP Verso configuratio
IP address:
®
2N Helios IP Verso to
119