2N Helios IP Verso Installation Manual page 110

Electronic Buttons
The Electronic buttons module (Part No. 9155036) is being prepared.
Wiegand Module
The Wiegand module (Part No. 9155037) is one of the
elements and is used for connecting an external Wiegand device (RFID card reader,
fingerprint or other biometric data reader) and/or connecting the 2N
Verso
galvanically isolated from the
500 V DC.
The module contains two
These two connectors are fully interchangeable and can be used both as inputs
from the main unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes an 80 mm long interconnecting cable.
The module name is configured in the Module name parameter in the Hardware /
Extenders menu.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
system to an external security exchange. All the inputs and outputs are
The input LED IN is addressed as follows:
e.g. module2.input1.
The input Tamper is addressed as follows:
e.g. module2.tamper.
The output LED
<module_name>.<output1>, e.g. module2.output1.
®
2N Helios IP Verso
®
2N Helios IP Verso
OUT (negated)
®
2N Helios IP Verso
®
system with insulation strength of
bus connectors.
<module_name>.<input1>
<module_name>.<tamper>
is addressed as
intercom
Helios IP
,
,
follows:
110