2N Helios IP Verso Installation Manual page 112

Blank module
The Blank module (Part No. 9155039) is used to cover an empty position.
Security Relay
The 2N
between the intercom and the connected electric lock. The 2N
Relay
and higher. It significantly enhances security of the connected electric lock as it
prevents lock opening by forced intercom tampering.
Function:
The 2N
the secured area) and the electric lock (inside the secured area). The 2N
Security Relay
received from the intercom.
Specifications:
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Active switch output: 12 V / 700 mA DC
Dimensions: (56 × 31 × 24) mm
Weight: 20 g
Installation:
Install the
and the electric lock inside the area to be secured (typically behind the door). The
device is powered and controlled via this two-wire cable and so can be added to an
existing installation. Thanks to its compact dimensions, the device can be installed into
a standard mounting box.
Connection:
Connect the
To the intercom active output (OUT1 or OUT2) , or
To the intercom relay output with a 12 V DC serial external power supply.
Connect the electric lock to the
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Helios IP Security Relay
is designed for any 2N Helios IP
®
Helios IP Security Relay
includes a relay that can only be activated if the valid opening code is
®
2N Helios IP Security Relay
®
2N Helios IP Security Relay
(Part No. 9159010) is used for enhancing security
intercom model with firmware versions 1.15
is a device installed between an intercom (outside
onto a two-wire cable between the intercom
to the intercom as follows:
®
2N Helios IP Security Relay
®
Helios IP Security
®
Helios IP
output as follows:
112