Danfoss VLT 8000 AQUA series Operating Instructions Manual page 87

operating data names and units of operating data
are displayed. In the second line, operating data 2
remains unchanged. When the key is released, the
different operating data values are shown.
REF% CURR.A.POW.,KW
50.0Hz
AUTO REMOTE RUNNING
Display mode IV:
This display mode is only active in connection with
local reference, see also Reference handling. In this
display mode, the reference is determined via the
[+/-] keys and control is carried out by means of the
keys underneath the indicator lamps. The first line
indicates the required reference. The third line gives
the relative value of the present output frequency at
any given time in relation to the maximum frequency.
The display is in the form of a bar graph.
USE +/-
40.0Hz
0
HAND LOCAL RUNNING
MG.83.A2.02 - VLT is a registered Danfoss trademark
SETUP
1
40Hz
SETUP
1
----60
®
VLT 8000 AQUA
87