Introduction To Operating Instructions - Danfoss VLT 8000 AQUA series Operating Instructions Manual

Introduction to Operating Instructions

These Operating Instructions are divided into four
sections with information about VLT 8000 AQUA.
Introduction to AQUA:
Installation:
Programming:
All about VLT 8000 AQUA:
NB!:
Indicates something to be noted by the reader.
Indicates a general warning
Indicates a high-voltage warning
MG.83.A2.02 - VLT is a registered Danfoss trademark
This section tells you the advantages you can obtain by using a VLT
8000 AQUA - such as Automatic Energy Optimization, Constant Torque
or Variable Torque and other AQUA relevant functions.
This section also contains examples of applications as well as
information about Danfoss.
This section tells you how to carry out a mechanically correct installation
of the VLT 8000 AQUA.
Furthermore, a list is given of mains and motor connections, together
with a description of the control card terminals.
This section describes the control unit and the software parameters for
the VLT 8000 AQUA. Also included is a guide to the Quick Setup menu,
which allows you to get started on your application very quickly.
This section gives information about status, warning and error messages
from the VLT 8000 AQUA. Additionally, information is given on technical
data, ser-vice, factory settings and special conditions.
®
VLT 8000 AQUA
9