13. Maintenance; 13.1. Do Not Repair Or Modify; Replacing The Integrated Keyboard Of The Dlt-V7210K - Advantech-DLoG DLT-V72 Series Manual

13. Maintenance

13.1. Do not repair or modify

Only the manufacturer and its authorized service centers may:
−
Conduct repairs
−
Carry out modifications
−
Replace modules
−
Open the device
The following measures may be performed by the operator (by skilled personnel):
−
Opening/closing the antenna cap to use the service USB interface and CFast slot.
−
Opening/closing the battery pocket to replace the battery pack
−
Replace the integrated keyboard of the DLT-V7210K
13.2.

Replacing the integrated keyboard of the DLT-V7210K

If necessary, the integrated keyboard of the DLT-V7210K can be removed and replaced by a new
keyboard (only by skilled personnel).
Hazardous voltage, electric shock from contact with live parts.
To prevent an electric shock:

Switch off the DLT-V7210K before replacing the integrated keyboard.

Disconnect the DLT-V7210K from the power supply.

Disconnect connected accessories.
ATTENTION: Physical damage
Preventing damage to the DLT-V7210K.

Observe the applicable ESD and accident prevention regulations.

The work may only be performed in an ESD-protected, clean environment.

ESD protective mats must be installed on the floor and on the worktable.

The installer must also wear ESD shoes and clothing
80 / 94
WARNING
DLT-V72 Series Manual V2.00
Maintenance
Advantech-DLoG