Engine Removal And Reinstallation - Suzuki GS1100G 1982 Service Manual

SERVlClNG ENGINE 3-2
ENGINE REMOVAL AND REINSTALLATION
ENGINE REMOVAL
Before
taking the engine out of
the frame, wash
the engine with a steam cleaner and drain engine
oil etc.
The procedure of
engine removal is se-
quentially explained in
the
following
steps,
and
engine installation
is effected by reversing the
removal procedure.
Place an oil pan
under the engine and remove
the engine oil drain plug and oil filter cap to
drain off engine oil.
m
Place
an
oil
pan under
the secondarv drive
drain plug and remove the gearshift lever and
secondary drive unit cover. Next, remove the
drain plug and drain off the secondary gear oil.
-T&,
Take off the seat.
m
Set the fuel cock in the "ON" position and shift
the fuel hose clip sideways to remove the
two
hoses (fuel and vacuum) from the fuel cock.