Tappet Clearance Adjustment - Suzuki GS1100G 1982 Service Manual

PERIODIC
MAlNTEMAfUCE AND TUNE-UP PROCEDURES 2-6
2.
After setting the clearance to the specification a t
the exhaust
tappets
of Nos. 1 and 2 cylinders,
turn the crankshaft 1 8 0 ' (half
rotation) to
bring
--
=
the intake cam of No. 1 cylinder t o the position
indicated. Read the clearance at the intake
! z -
tappets
of Nos.
1
and
2
cylinders and, if neces-
* 0 -
.*-
-
sary, adjust the clearance
to
each specification.
W
-
3.
Turn the crankshaft a further 180°, bringing the
exhaust cam of No. 4 cylinder t~ the position
indicated. Under this condition, repeat the
checking and adjusting process outlined in
step
"1" a t
the exhaust tappets
of Nos. 3
and
4
cylinders.
-
4. Again turn the crankshaft a further 180°, bring-
ing
the intake cam of No. 4 cylinder
to
the
posi-
tion indicated. Similarly check and adjust the
clearance at the intake
tappets
of Nos.
3 and 4
cylinders.
TAPPET CLEARANCE ADJUSTMENT
The clearance is adjusted by replacing the existing
tappet shim by a thicker or thinner disc.
*
6
1. Place a
fingertip on
the tappet, and turn it in
place to bring notch
@
to the position indicated.