Starter Motor Reassembly; Brush Holder; Housing End; Securing Screws - Suzuki GS1100G 1982 Service Manual

ELECTRICAL SYSTEM 7-8
STARTER MOTOR REASSEMBLY
BRUSH HOLDER
When fixing brush holder to starter motor case,
align the protrusion
@
of the starter motor case
with the notch
@
of the brush holder.
HOUSING END
When installing housing end, fix the protrusion
3
of the starter motor case to the notch
@
on
the housing end.
SECURING SCREWS
Apply
Thread Lock "1363C" to
starter
motor
securing screws.
STARTER RELAY INSPECTION
Disconnm lead wire of the starter motor at
starter relay.
Turn on the ignition switch,
inspect
the continuity
between the terminals, positive and negative, when
pushing the starter button.
If the starter relay is in sound condition, continu-
ity is found.
991 04
-
32050 Thread Lock "1 363C"
09900
-
25002 Pocket tester