Danfoss VLT Active Front End AFE 302 Operating Instructions Manual page 63

How to Programme
15-48 LCP Id No
Range: Function:
0 [0 - 20 ] View the LCP ID number.
*
15-49 SW ID Control Card
Range: Function:
0 [0 - 20 ] View the control card software version number.
*
15-50 SW ID Power Card
Range: Function:
0 [0 - 20 ] View the power card software version number.
*
15-51 AFE Serial Number
Option: Function:
View the AFE serial number.
15-53 Power Card Serial Number
Range: Function:
0 [0 - 19 ] View the power card serial number.
*
6.9.5 15-9* Parameter Info
15-92 Defined Parameters
Array [1000]
0 [0 - 9999] View a list of all defined parameters in the AFE.
*
The list ends with 0.
15-93 Modified Parameters
Array [1000]
Range: Function:
0 [0 - 9999 ] View a list of the parameters that have been
*
changed from their default setting. The list ends
with 0. Changes may not be visible until up to
30 s after implementation.
15-99 Parameter Metadata
Array [30]
Range: Function:
0 [0 - 9999 ] This parameter contains data used by the MCT
*
10 Set-up Software.
MG33X402
Operating Instructions
Danfoss A/S © Rev. 05/2014 All rights reserved.
6 6
61