Danfoss VLT Active Front End AFE 302 Operating Instructions Manual page 48

How to Programme
6.2.4 0-4* LCP Keypad
Enable, disable and password protect individual keys on
the LCP.
0-40 [Hand on] Key on LCP
Option:
[0] Disabled
[1] Enabled
*
[2] Password Avoid unauthorised start in Hand mode. If
6 6
0-41 [Off] Key on LCP
Option:
[0] Disabled
[1] Enabled
*
[2] Password Avoids unauthorised stop. If 0-41 [Off] Key on LCP
0-42 [Auto on] Key on LCP
Option:
[0] Disabled
[1] Enabled
*
[2] Password Avoids unauthorised start in Auto mode. If
0-43 [Reset] Key on LCP
Option:
[0] Disabled
[1] Enabled
[2] Password
[7] Enabled
without OFF
[8] Password
without OFF
6.2.5 0-5* Copy/Save
Copy parameters from and to the LCP. Use these
parameters for saving and copying set-ups from one
frequency converter to another.
46
Operating Instructions
Function:
Key disabled avoids accidental usage of the key.
[Hand On] key enabled
parameter 0-40 [Hand on] Key on LCP is included
in My Personal Menu, define the password in
0-65 Personal Menu Password. Otherwise, define
the password in parameter 0-60 Main Menu
Password.
Function:
Avoids accidental stop of the AFE.
is included in the Quick Menu, then define the
password in parameter 0-65 Quick Menu
Password.
Function:
avoid accidental start of the AFE in Auto mode.
0-42 [Auto on] Key on LCP is included in the
Quick Menu, then define the password in
parameter 0-65 Quick Menu Password.
Function:
No effect when [Reset] is pressed. Avoids
accidental alarm reset.
Avoids unauthorised resetting. If
parameter 0-43 [Reset] Key on LCP is included
in the Quick Menu, then define the password
in parameter 0-65 Quick Menu Password.
Resets the AFE without setting it in Off mode.
Resets the AFE without setting it in Off mode.
A password is required when pressing [Reset]
(see [2]).
Danfoss A/S © Rev. 05/2014 All rights reserved.
0-50 LCP Copy
Option:
[0] No copy
*
[1] All to LCP
[2] All from LCP
[3] Size indep. from LCP
0-51 Set-up Copy
Option:
[0] No copy
*
[1] Copy to set-up 1
[2] Copy to set-up 2
[3] Copy to set-up 3
[4] Copy to set-up 4
[9] Copy to all
6.2.6 0-6* Password
0-60 Main Menu Password
Range: Function:
100 [-9999 - Define the password for access to the Main
*
9999 ] Menu via the [Main Menu] key. If
0-61 Access to Main Menu w/o Password is
set to [0] Full access, this parameter is
ignored.
0-61 Access to Main Menu w/o Password
Option: Function:
[0] Full access Disables password defined in
*
parameter 0-60 Main Menu Password.
[1] LCP: Read Prevent unauthorised editing of Main Menu
only parameters.
[2] LCP: No Prevent unauthorised viewing and editing of
access Main Menu parameters.
[3] Bus: Read Read-only functions for parameters on
only Fieldbus and/or FC standard bus.
[4] Bus: No No access to parameters is allowed via
access Fieldbus and/or FC standard bus.
[5] All: Read only Read-only function for parameters on LCP,
Fieldbus or FC standard bus.
[6] All: No access No access from LCP, Fieldbus or FC standard
bus is allowed.
If [0] Full access is selected, parameter 0-60 Main Menu
Password, 0-65 Personal Menu Password and 0-66 Access to
Personal Menu w/o Password are ignored.
NOTICE
A more complex password protection is available for
OEMs upon request.
Function:
Function:
No function
MG33X402