Access To Control Terminals; Electrical Installation, Control Terminals - Danfoss VLT AutomationDrive FC 302 Installation Manual

Electrical Installation
Figure 4.7 Control Card Wiring Path for Frame Size E9
MG37A322
Installation Manual
1 Routing path for the control card wiring, inside the adjustable
frequency drive enclosure.
Figure 4.8 Control Card Wiring Path for Frame Size F18

4.8.2 Access to Control Terminals

All terminals to the control cables are located beneath the
LCP (both filter and adjustable frequency drive LCP). They
are accessed by opening the door of the unit.
4.8.3 Electrical Installation, Control
Terminals
To connect the cable to the terminal:
1.
Danfoss A/S © Rev. 04/2015 All rights reserved.
Strip insulation by about 0.35–0.4 in [9–10 mm]
Electrical installationControl terminals
4 4
1
43