Danfoss VLT AutomationDrive FC 302 Installation Manual page 121

Appendix A - Parameters
9.3.9 AF Readouts 301-**
Par. Parameter description
No. #
301-0* Output Currents
301-00 Output Current [A]
301-01 Output Current [%]
301-1* Unit Performance
301-10 THD of Current [%]
301-11 Estimated THD of Voltage [%]
301-12 Power Factor
301-13 Cos-phi
301-14 Leftover Currents
301-2* Line Power Status
301-20 Line Power Current [A]
301-21 Line Power Frequency
301-22 Fund. Line Power Current [A]
MG37A322
Installation Manual
Default value 4-set-up
0.00 A All set-ups
0.0% All set-ups
0.0% All set-ups
0.0% All set-ups
0.00 N/A All set-ups
0.00 N/A All set-ups
0.0 A All set-ups
0 A All set-ups
0 Hz All set-ups
0 A All set-ups
Danfoss A/S © Rev. 04/2015 All rights reserved.
FC 302 Change Conver-
only during sion
operation index
TRUE -2
TRUE -1
TRUE -1
TRUE -2
TRUE -2
TRUE -1
TRUE 0
TRUE 0
TRUE 0
Type
Int32
Int32
Uint16
Uint16
Uint16
Int16
Uint32
Int32
Uint8
Int32
9 9
119