T S - 6 0 0 U S E R G U I D E
FLASH/RECALL DURATION
The phone's timed break recall is preset to 100mS. Your reseller will advise if this
needs to be changed.
SELECTING RING TONE
You can select one of four ring tones for this telephone:
MENU
1. Press the
2. The phone rings with Ring Tone 1 for about 2 seconds.
SAVE
3. Press the
4. Press the
button or the
5. After the end of the desired ring tone, press the
ADJUSTING THE DISPLAY ANGLE
You can optimize the LCD display by adjusting the viewing angle. To adjust the LCD
viewing angle, move the rear edge of the LCD module up or down.
ADJUSTING THE DISPLAY CONTRAST
The display can be adjusted to suit the light level of your room and your viewing
preference. To make the contrast of the display lighter or darker, press the
to the right of the screen until the desired contrast is reached.
ADJUSTING THE HANDSET RECEIVER VOLUME
If you need to adjust the handset receiver volume:
1. Lift the handset and listen to the dial tone.
2. Press the right side of the
3. Press the left side of the
4. Replace the handset when the desired receiver volume is reached.
6
button followed by
button to select Ring Tone 1; or
button to select another ring tone.
VOLUME
button to increase the receiver volume.
VOLUME
button to decrease the receiver volume.
3
.
SAVE
button to select it.
H T T P : / / G LO B A L .T A L K S W I T C H . C O M
Use Save to End
Use
/
Enter to Select
1 = Ring tone 1
2 = Ring tone 2
3 = Ring tone 3
4 = Ring tone 4
button