Phone Doesn't Ring; No Dial Tone; No Caller Id; Handset Doesn't Work - Talkswitch TS-400 User Manual

Hide thumbs Also See for TS-400:
Table of Contents

Advertisement

T S - 4 0 0 U S E R G U I D E

PHONE DOESN'T RING

• Verify that the ringer is not turned off. Check the ring volume switch at the
back of the phone phone is idle to turn the ringer on.
• Verify that the line cord is properly connected and that dial tone is present
when going off-hook.
• Verify that the TalkSwitch is properly programmed for your extension's
call handling.
• Verify that Do Not Disturb is disabled for your extension.

NO DIAL TONE

• Verify that the line cord is properly connected.
• Try with a different line cord.
• Test the telephone in a different jack. If it works, then the jack may be
defective or the TalkSwitch may be wired incorrectly.

NO CALLER ID

• Check Caller ID subscription. In order to receive Caller ID for external calls, you
must be subscribed to the Caller ID service from your telephone service provider.

HANDSET DOESN'T WORK

• Verify that the coiled handset cord jack is fully inserted into the handset.

HEADSET DOESN'T WORK

• Verify that your headset is properly connected.
PROBLEMS DIALLING
• Ensure that your setting for direct line access on the phone matches the
setting on the TalkSwitch.

MESSAGE WAITING COUNT DOES NOT WORK

• Verify that your extension is programmed in TalkSwitch as a TS-400.

CAN'T RECEIVE ON-HOOK INTERCOM CALLS

• Verify that your extension is programmed in TalkSwitch as a TS-400.

CAN'T RECEIVE GROUP PAGING

• Verify that your extension is programmed in TalkSwitch as a TS-400.
2 0
H T T P : / / G LO B A L .T A L K S W I T C H . CO M

Advertisement

Table of Contents
loading

Table of Contents