Installing The Oven Exhaust Kit - Thermo Scientific TRACE 1310 Hardware Manual

Gas chromatographs

Hide thumbs Also See for TRACE 1310:

Table of Contents

Installing Optional Kits

Installing the Oven Exhaust Kit

TRACE 1300 and TRACE 1310 Hardware Manual

The oven vents at the back of the GC discharge hot air up to 450 °C (842 °F) during cooling.

Installing the optional Oven Exhaust Kit (PN 19050760), the hot air from the oven vents can

be carried away to a fume hood or other exhausting devices

The kit includes two air ducts and two 3-m length extensible aluminium tubes.

Figure 325. Air Duct and Extensible Aluminium Tube

Extensible Aluminium Tube

To install the oven exhaust kit

1. Put the GC in standby condition.

2. Cool the oven to room temperature.

3. Place each air duct on the oven vent inserting the hooks of the air duct into the relevant

vertical slots provided on the GC back panel.

4. Place an end of each extensible aluminium tube on each air duct.

5. Connect the other end of the extensible aluminium tube to an exhausting device.

6. Set the normal GC working conditions.

Extensible Aluminium Tube

Thermo Scientific