Connect The Autosampler To The Gc System - Thermo Scientific TRACE 1310 Hardware Manual

Connect the Autosampler to the GC System

Thermo Scientific
Figure 48. Connection of TriPlus RSH/ TriPlus 100 Liquid Sampler to two GC via LAN
First GC
Second GC
TriPlus RSH
TriPlus 100 LS
To connect an autosampler to the GC system see the following procedures:
• "To connect a TriPlus RSH/TriPlus 100 Liquid Sampler autosampler"
• "To connect a second GC coupled with the same TriPlus RSH/TriPlus 100 Liquid
Sampler autosampler"
• "To connect a a TriPlus autosampler"
• "To connect a second GC is also coupled with the same TriPlus autosampler"
• "To connect an AI/AS 1310 - AI/AS 3000 II autosampler"
• "To perform the HWSetup 1 of two AI/AS 1310 - AI/AS 3000 II in Gemini
Configuration" on page 39
• "To perform the HWSetup of two AI/AS 1310 - AI/AS 3000 II in Gemini
Configuration" on page 40
Ethernet Cable
Ethernet
Ethernet Cable
Hub/Switch
Ethernet Cable
on page 38
on page 38
Installing the Autosampler
GC 1
Y-shape Handshake Cable
GC 2
CDS
on page 39
TRACE 1300 and TRACE 1310 Hardware Manual
1
Installation
on page 38
on page 38
37