Installing The Data System Software - Thermo Scientific TRACE 1310 Hardware Manual

1
Installation

Installing the Data System Software

Installing the Data System Software
42 TRACE 1300 and TRACE 1310 Hardware Manual
 To configure handshaking parameters through the Chromatography Data System
1. Launch the Data System. In the relevant Configuration page specify the handshaking
parameters.
The data systems as Chromeleon, Xcalibur, Chrom-Card, or ChromQuest, are designed to be
compatible with commercially available computers and requiring the use of Windows™ XP,
Windows™ Vista, or Windows™ 7 operating system.
IMPORTANT Before installing the Data System, please make sure that any previous
version is removed from the PC hard drive.

To install the data system software
1. Remove the current version.
a. Select Control Panel > Add/Remove Programs.
b. In the dialog window displayed, select the current Data System software version to
remove.
c. Click Add/Remove.
2. Install the new version.
a. Insert the CD/DVD provided and start Setup.exe. Click Next several times.
b. Continue the installation by following the instructions displayed.
c. At the end of the installation, reboot the computer if required.
d. Start the Data System you installed selecting it in the page Start-Program of the
desktop.
e. The Main Page of the data system will be displayed.
For details about the data system in use, please refer to the relevant User Guide.
Thermo Scientific